MIMAKI UJV55-320 PRINTER

MIMAKI UJV55-320 PRINTER

Features:

• Ink type: LUS-120 UV curable ink 1L bottle
• Colours: CMYKLcLm and White
• Available widths: 2.5m x 1.3m and 2.5m x 3.1m
• The combination of white and color inks adds values to transparent media print.
• LED light is installed to the front side of the machine.
• High productivity leveraged by the 3.2-m-wide LED-UV printer
• High printing speed of 60m2/h is achieved on banner material in a high-speed mode (300 × 600 dpi, 4 pass).
• The 3.2-m width allows twin roll print capability.
• Nozzle check unit (NCU) automatically detects and cleans clogged nozzles.


White ink delivers added-value print

White ink enhances the quality of graphic design. On transparent media, white base layer print enhances color vibrancy of an upper color layer. The three-layer printing (base layer: color, middle layer: white, upper layer: color) enables the creation of window signs that are beautiful from any angle. Furthermore, when the image file is printed only in white, an appearance of printing is very stylish. Such printing method broadens an application of white ink printing.


Backlit signage for beautiful colors during day and night

UV-curable inks form thicker ink films compared to other inks such as solvent inks and maintain vibrant colors when using for backlit signage. Also, white ink enables three-layer printing (color + white + color). In general, only color UV inks are used for multi-layer printing to increase the degree of opacity but the print appears dark on the sign-board during the day, when internal illuminations are off. UJV55-320 enables beautiful coloring reproduction during both day and night by introducing a white layer in the three-layer printing. This allows the design of beautiful backlit signage that can be adjusted according to application, location, and graphic design file.


Built-in LED light for checking a quality of print

Built-in LED light is useful for checking the print appearance on the backlit signage before taking up the print. This capability minimizes waste media because an operator can stop printing immediately when misprint or other problems are found. Furthermore, the productivity is also increased by printing and performing a print quality check simultaneously.


High productivity leveraged by the 3.2-m-wide LED-UV printer

UV-curable inks are instantaneously cured by UV irradiation; thus, no drying time is needed. The ability to carry out processing and operations immediately after printing shortens the operation time, improves productivity, and helps meet a short delivery time.


Productivity of high-speed mode with a printing speed of 60m2/h

The new model achieves a printing speed of 60m2/h in high-speed mode on banner material. In order to deliver excellent print results and productivity, we provide optimal profiles that meet various media types and print resolutions.


Twin-roll printing

Taking advantage of the 3,200 mm printing width, two media rolls can be mounted and can be printed on simultaneously*. This function enables operating different print jobs at once. The user may select the preferable widths separately for each roll within a specified range from 210 to 1,524 mm. Each media width and the distance between the two media rolls are automatically detected.


Uninterrupted printing solutions

Useful functions are similar to excellent assistants. Clogged nozzles are automatically detected and recovered without causing inconvenience to users. The nozzle check unit (NCU) automatically detects clogged nozzles and operates cleaning; whereas, the Nozzle recovery unit (NRS) uses only good nozzles as substitutes, if the clogged nozzles are not recovered after cleaning. These functions allow constant printing and reduce waste printing due to defective nozzles.


NCU automatically detects and recovers clogged nozzles

Clogged nozzles are detected automatically by monitoring ink droplets with sensors. When clogged nozzles are located, these are automatically cleaned, reducing waste printing. Nozzles are checked per transfer file.


NRS for maintaining productivity

If the clogged nozzles are not recovered after cleaning through the NCU function, the NRS selects substitute nozzles and then restarts printing. This is a significant novelty, since previously, when nozzle cleaning fails, the printhead has to be repaired by a technician, and the printing operation ceases until the printhead is repaired. The NRS* allows the printer to continue printing without interruption by using non-defective nozzles as substitutes for defective nozzles until the technician arrives.


Mimaki Circulation Technology (MCT) maintains white ink print quality

MCT circulates white ink at regular intervals to prevent pigment sedimentation. The MCT achieves stable inkjet even soon after turning on the machine. Additionally, this technology reduces white ink waste and therefore it provides eco-friendly and economical print operation.

Code Product Name Size
UJV55-320 MIMAKI UJV55-320 PRINTER 3200mm Enquiry Only

Specifications 

Specification

UJV55-320 

Max. Printing Width

3200mm

Acceptable Roll Media

210mm to 3250mm x 1mm thickness

Interface

Ethernet (100DBase-T) or USB2.0

Print Heads

4 x Piezo Inkjet (staggered)

Print Colours

6-Colour CMYK plus White

Print Resolution

Maximum 1200 dpi

Ink Types

Mimamki LUS-120

Ink Cartridge

1Ltr Bottle

Ink Monitoring

Ink level indicator for each colour, ink low warning system

RIP Software

RasterLink6

Power Saving

Auto Sleep

Recommended Environment

Temperature 20-30° Celsius; Humidity 35-80%

Dimensions (W) 5410mm x (D without tables) 995mm x (H) 1440mm 
Weight

910kg



Downloads