 |
 |
Physical Characteristics
| Gantry | Verso | Enduro | Fusion |
| Heavy Duty, Steel, Precision Machined and Fully Welded |  |
|
|
| Sub Frame | Verso | Enduro | Fusion |
| Heavy Duty, Steel, Precision Machined and Fully Welded | |
|
|
| Heavy Duty, Steel, Fork Lifting Cross Members | |
|
|
| Router Bed | Verso | Enduro | Fusion |
| Heavy Duty, Extruded Aluminium, T Slot, Vacuum Ready | |
|
|
| Vacuum Bed Control Valves | |
|
|
| Rigid Foam Surface, Hole and Pocket, Cut to Mask | |
|
|
| Rigid Foam Surface, Hole and Pocket, T-Slot | Option | Option | Option |
| Drive Train | Verso | Enduro | Fusion |
| Servo Motors with Digital Encoders on X (x2), Y and Z | |
|
|
| X Axis - High Performance, Ballscrew (x2) | |
|
|
| Y Axis - High Performance, Ballscrew | |
|
|
| Z Axis - High Performance, Ballscrew | |
|
|
Vital Statistics
| Active Cutting Area | Verso | Enduro | Fusion |
| 1 2500mm x 1540mm | |
|
- |
| 2 3700mm x 1885mm | - | |
|
| 3 3100mm x 2058mm | |
|
- |
| 4 4100mm x 2058mm | - | |
|
| Bed/Gantry Clearance | Verso | Enduro | Fusion |
| 140mm | |
|
|
| 300mm | Option | Option | Option |
| Z Axis Stroke | Verso | Enduro | Fusion |
| 240mm | |
|
|
| 535mm | Option | Option | Option |
| Maximum Material Thickness | Verso | Enduro | Fusion |
| 120mm | |
|
|
| 280mm | Option | Option | Option |
| Will it fit in your workshop? | Verso | Enduro | Fusion |
| 1 Length 3400mm x Width 2250mm | |
|
- |
| 2 Length 4900mm x Width 3000mm | - | |
|
| 3 Length 4200mm x Width 2758mm | |
|
- |
| 4 Length 5200mm x Width 2758mm | - | |
|
Power and Performance
| Spindle Motors | Verso | Enduro | Fusion |
| 5.5kW HSD Manual Tool Change | |
- | - |
| 3.8kW HSD Auto Tool Change | Option | |
- |
| 8kW HSD Auto Tool Change | - | Option | |
| Multibore Drill Head (NBM) | Verso | Enduro | Fusion |
| 5 Position | - | Option | - |
| 9 Position | - | - | |
| Maximum Traverse / Cutting Speed | Verso | Enduro | Fusion |
| 36 metres per minute (600mm per second) | - | - | |
| 24 metres per minute (400mm per second) | - | |
- |
| 15 metres per minute (250mm per second) | |
- | - |
Control and Accuracy
| Motion Control System | Verso | Enduro | Fusion |
| Proprietary - Closed Loop Digital Servo | |
|
|
| Tekcel Firmware | |
|
|
| Open Architecture O.S. | |
|
|
| Operator Interface | Verso | Enduro | Fusion |
| LCD Panel / Joystick | |
|
|
| Touch Screen | - | Option | Option |
| Auto Tool Change Capability | Verso | Enduro | Fusion |
| 6 Tool Static Rack | Option | |
- |
| 18 Tool Pop Up Rack | - | Option | |
| Tool / Material / Cut Registration | Verso | Enduro | Fusion |
| Automatic Tool Length Sensor | |
|
|
| Sheet Registration Pins | |
|
|
| Opticam - Cut to Print Camera System | Option | Option | Option |
Vacuum Hold Down
| Vacuum Hold Down | Verso | Enduro | Fusion |
| 7.5kW Vacuum Pump | Option | Option | Option |
| Pressure / Speed Control | - | Option | Option |
Dust Extraction
| Dust Extraction | Verso | Enduro | Fusion |
| Tekcel Dust Extractor | Option | Option | Option |
Nested Based Manufacturing
| Nested Based Manufacturing | Verso | Enduro | Fusion |
| Flow Through Sheetloader | - | - | Option |
| Scraper Arm | - | Option | Option |
| Scissor Lift Table | Option | Option | Option |
| Labelling System | Option | Option | Option |
| Bar Code Reader | Option | Option | Option |
Metal Cutting
| Metal Cutting | Verso | Enduro | Fusion |
| Mist Cooling Atomiser | Option | Option | Option |
Misc.
| Misc. | Verso | Enduro | Fusion |
| Trailing Blade Knife | Option | Option | Option |
| Pencil Tool | Option | Option | Option |
| Material Thickness Sensor | Option | Option | Option |
